Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 216 Series 216 Series, 5x20 mm, Fast-Acting Fuse RoHS Pb PS E Description 5x20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features * Designed to International (IEC ) Standards for use globally * Meets the IEC 60127-2, sheet 1 specification for fast-acting fuses * Available in cartridge and axial lead form * RoHS compliant and lead-free Agency Approvals Agency PS E Agency File Number 1-5A 6.3A-10A 12.5A 16A 1-5A 6.3A-10A 12.5A 16A Cartridge: NBK 080205-E10480A NBK 250702-E10480E NBK 240108-JP1021C NBK 240108-JP1021E Leaded: NBK 080205-E10480B NBK 250702-E10480F NBK 240108-JP1021D NBK 240108-JP1021F 2003010207079960 SU05001-2013 Ampere Range Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 1A - 16A Electrical Characteristics for Series % of Ampere Rating 0.05A - 6.3A 150% 1A - 10A 210% E10480 0.05A - 16A 29862 275% 1402843 40013834 40016442 Opening Time 0.05A - 4A 60 minutes, Minimum 5A - 6.3A 60 minutes, Minimum 8A - 16A 30 minutes, Minimum 0.05A - 4A 30 minutes, Maximum 5A - 6.3A 30 minutes, Maximum 8A - 16A 30 minutes, Maximum 0.05A - 4A 0.01 sec.., Min.; 2 sec. Max. 5A - 6.3A 0.01 sec.., Min.; 3 sec. Max. 0.05A - 10A, 16A 8A - 16A 0.04 sec., Min.; 20 sec. Max. 0.05A - 6.3A *8A, *10A 0.05A - 4A .003 sec., Min.; 0.3 sec. Max. 5A - 6.3A .003 sec., Min.; 0.3 sec. Max. 8A - 16A .01 sec.., Min.; 1.0 sec. Max. 0.05A - 4A .02 seconds, Maximum 5A - 6.3A .02 seconds, Maximum 8A - 16A .03 sec.onds, Maximum 400% *12.5A KM41462 1A - 6.3A J50248090 8A - 16A N/A 0.05A - 16A *Approval for Cartridge versions only Ampere Rating 1000% Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see `Recommended Accessories' section. Application testing is strongly recommended. (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/20/19 Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 216 Series Electrical Characteristics Specifications by Item Nominal Amp Voltage Nominal Amp Interrupting Cold Rating Rating Melting Code Rating Resistance 2 (A) (V) I t (A2 sec) (Ohms) .050 .063 .080 .100 .125 .160 .200 .250 .315 .500 .630 .800 001. 1.25 01.6 002. 02.5 3.15 004. 005. 06.3 008. 010. 12.5 016. 0.05 0.063 0.08 0.1 0.125 0.16 0.2 0.25 0.315 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10 12.5 16 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1500A@ 250Vac 750A@ 250Vac Agency Approvals Maximum Maximum Voltage Power Drop at Dissapation Rated at 1.5ln Current (W) (mV) 15.9000 10.4500 7.8850 5.7925 3.6750 5.3490 3.3500 2.3500 1.8500 0.8660 0.4650 0.2950 0.2370 0.1530 0.1112 0.0764 0.0584 0.0368 0.0247 0.0183 0.0137 0.0123 0.0079 0.0057 0.00019 0.00079 0.00084 0.00450 0.00546 0.00326 0.00439 0.01350 0.02320 0.16500 0.05940 0.14600 0.18000 0.48000 1.00500 1.87000 3.67200 6.70000 14.99500 27.46000 56.43000 64.31500 154.34000 175.00000 10000 8800 7600 7000 5000 4300 3500 2800 2500 1800 1500 1200 1000 800 600 500 400 350 300 250 200 200 200 200 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 N/A** 0.0040 462.50000 200 N/A** PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x*** x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x* x* x* x x x x x x x x x x x x x x x x x*** x * Approval for cartidge versions only. N/A** - Please contact Littelfuse for details on these parameters I2t test at 10x rated current ***1500A@750Vac for 16A Average Time Current Curves 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 12.5A 16A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/20/19 Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 216 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Preheat: 240 Lead-Free Recommendation (Depends on Flux Activation Temperature) 220 200 180 160 140 (Typical Industry Recommendation) Temperature Minimum: 100C Temperature Maximum: 150C Preheat Time: 60-180 seconds 120 100 80 60 40 Solder Pot Temperature: 260C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (C) - Measured on bottom side of board 300 Solder Iron Temperature: 350C +/- 5C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Body: Ceramic Cap: Nickel-plated brass Leads: Tin-plated Copper Filler (160mA-16A): Sand Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Operating Temperature -55C to +125C Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles -65C to +125C) Vibration MIL-STD-202, Method 201 Product Marking Cap 1: Brand logo, current and voLage rating Cap 2: Agency approval markings Humidity MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40C) for 240 hours. Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Salt Spray MIL-STD-202, Method 101, Test Condition B (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/20/19 Axial Lead & Cartridge Fuses 5x20 mm > Fast-Acting > 216 Series Dimensions Part Numbering System 0216 xxxx M X E P 200.5 0216 000XP +0.1 5.2 -0.2 5.10.6 Series 5.10.6 Amp Code 401.0 0216.050XEP to 0216.800XEP Refer to Amp Code column of Electrical Characteristics Table 5.60.4 21.51.0 Quantity Code 0.650.05 401.0 0216001.XEP to 0216016.XEP M = 1000 Packaging Code 5.50.3 21.51.0 X = Filler Option Codes 0.650.05* Blank : Cartidge Type Fuse E : Axial Leaded Fuse All dimensions in mm Lead-free Notes: * Ratings above 6.3 A have 0.8 0.05 diameter lead. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A 216 Series Bulk N/A 1000 MX Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087") Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Accessory Type Holder Block Clip Series Description Max Application Voltage Max Application Amperage 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20A 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK(R) Fuse Block 646 PC Mount Miniature Fuse Block 10 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact Littelfuse for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. (c) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/20/19